Walther PPK, PP, PPK/S & P38 Grips: Which Grips Fit Your Walther?

Walther PPK, PP, PPK/S & P38 Grips: Which Grips Fit Your Walther?

2 min read

Few pistols are as famous as the Walther PPK. Together with the larger PP, the PPK/S and the wartime P38, it shaped how a compact European pistol looks and feels. Many of these Walthers are now collector pieces – and many still wear worn plastic grips that do not do them justice.

Looking for grips that fit your Walther? → Shop Walther grips

The names are confusingly close, so the question we hear most is: which grips fit my Walther? Here is the short answer for each model.

PP, PPK and PPK/S: what is the difference?

The PP (1929) is the larger pistol. The PPK (1931) is its shorter version with a shorter grip frame, so PP grips do not fit a PPK, and the other way round. The PPK/S combines the PPK slide with the longer PP frame – so a PPK/S takes PP-size grips. That is why we sell one set for the PPK and another for the PP and PPK/S.

P38 and P1

The P38 was adopted in 1938; after the war it was made again in Germany as the P1. Our P38 / P1 grips are made for this pattern. The modern Q5 Match has its own frame and its own grips.

Choose the set that matches your pistol:

Why Turkish walnut?

Walnut is the natural partner for a classic Walther. It is warm to the touch, has a fine, even grain and holds checkering and engraving crisply. Our designs range from plain checkered panels in the original style to engraved banners, floral patterns and gold details.

Not sure which Walther you have?

Look at the marking on the slide (PP, PPK or PPK/S). If you still are not sure – or your pistol is a licensed copy – send us a photo of the grip area on WhatsApp before ordering and we will confirm the fit.

How to install

  1. Make sure the pistol is unloaded and the magazine is removed.
  2. Unscrew and remove the old grip panels.
  3. Fit the new panels and check that they sit flush against the frame.
  4. Tighten the screws until snug – do not over-tighten.

For a full walkthrough, see our step-by-step grip installation guide.

Frequently asked questions

Do PPK grips fit a PPK/S?

No. The PPK/S has the longer PP frame, so it needs our PP / PPK/S grips.

Do P38 grips fit the P1?

Yes – our P38 / P1 grips are made for both.

👉 Shop Walther grips

Keep reading

0 comments

Leave a comment

Please note, comments need to be approved before they are published.