CZ 75, Shadow 2 & SP-01 Grips: Which Grips Fit Your CZ?

CZ 75, Shadow 2 & SP-01 Grips: Which Grips Fit Your CZ?

2 min read

The CZ 75 is one of the most copied and best-loved service pistols ever made. Since 1975 the Česká zbrojovka design has grown into a whole family – the CZ 75 B and 85 B, the SP-01, the competition Shadow 2 and TS 2, and compact versions. Shooters across Europe, from Poland to Spain, carry and compete with them every week.

Looking for grips that fit your CZ? → Shop CZ grips

Because the family is so large, the most common question we get is simple: which grips fit my CZ? This guide answers that, and explains how walnut and acrylic grips compare.

CZ models are not all the same

All CZ 75-family pistols look alike, but the grip frame changes from model to model. The SP-01, Shadow 2 and TS 2 have their own frame shape, the compact models have a shorter grip, and target grips add a palm swell. That is why we make a separate, CNC-machined set for each model rather than one “universal” CZ grip.

Choose the set that carries the exact name of your pistol:

Walnut or acrylic?

Turkish walnut gives a warm, natural look and a slightly textured feel that stays secure with sweaty hands – the classic choice for a CZ 75 B or a Shadow 2 used every week. Acrylic is glossy and colourful, perfect if you want a pistol that stands out at the range. Many of our CZ designs come with checkering, laser engraving or a metal medallion.

Not sure about your model?

Some CZ variants and clones differ slightly in the grip area. If you are not sure, send us a photo of the grip area on WhatsApp before ordering and we will confirm the fit.

How to install

  1. Make sure the pistol is unloaded and the magazine is removed.
  2. Unscrew and remove the old grip panels.
  3. Fit the new panels and check that they sit flush against the frame.
  4. Tighten the screws until snug – do not over-tighten.

For a full walkthrough, see our step-by-step grip installation guide.

Frequently asked questions

Do CZ 75 B grips fit the Shadow 2?

No. The Shadow 2 has its own frame shape, so it needs grips made for the Shadow 2.

Are screws included?

Our CZ grips reuse your pistol’s original grip screws.

👉 Shop CZ grips

Keep reading

0 comments

Leave a comment

Please note, comments need to be approved before they are published.